Dominion Atlantic Railway Digital Preservation Initiative - Wiki

Use of this site is subject to our Terms & Conditions.

Difference between revisions of "Habitant River Bridge"

From DARwiki
(mileage adjustment)
Line 5: Line 5:
  
 
Pile trestle bridge over Habitant river at [[Canning]], about Mile 9.6
 
Pile trestle bridge over Habitant river at [[Canning]], about Mile 9.6
 +
 +
When first built by the [[Cornwallis Valley Railway]], the Habitant River and its wide tidal flood plane was crossed by three trestles, including one that stretched 120 feet, and a 16 foot high embankment on the Canning side.<ref>"Cornwallis Valley Railway", ''The Acadian'', Jan. 29, 1890.</ref> Most of the trestles were replaced by embankment fill over the years leaving a single trestle crossing the river channel on the [[Hillaton]] side of the river.
  
 
* Trestle bents had five pilings, 10" on the inside, 14" on the outside
 
* Trestle bents had five pilings, 10" on the inside, 14" on the outside

Revision as of 15:50, 3 April 2025

Habitant River Bridge


Pile trestle bridge over Habitant river at Canning, about Mile 9.6

When first built by the Cornwallis Valley Railway, the Habitant River and its wide tidal flood plane was crossed by three trestles, including one that stretched 120 feet, and a 16 foot high embankment on the Canning side.[1] Most of the trestles were replaced by embankment fill over the years leaving a single trestle crossing the river channel on the Hillaton side of the river.

  • Trestle bents had five pilings, 10" on the inside, 14" on the outside
  • Appear to have been six trestle bents: three each side of the river with a short span
  • Old 2 1/2" boiler pipe post on west side of north end of bridge, probably post for sign

Gallery

References and Footnotes

Dan Conlin Field notes CVR Trip, April 20, 2008

External Links

  1. "Cornwallis Valley Railway", The Acadian, Jan. 29, 1890.