Dominion Atlantic Railway Digital Preservation Initiative - Wiki

Use of this site is subject to our Terms & Conditions.

Difference between revisions of "Kentville Railyard"

From DARwiki
Line 41: Line 41:
 
File:Slide 78 - 6 may 76.JPG | Looking out from the [[Kentville Roundhouse|Kentville Turntable]] into the [[Kentville Railyard]] - 6th May 1976
 
File:Slide 78 - 6 may 76.JPG | Looking out from the [[Kentville Roundhouse|Kentville Turntable]] into the [[Kentville Railyard]] - 6th May 1976
 
File:Slide 51 - 31 may 76.JPG|[[Kentville Railyard]], May 31, 1976.
 
File:Slide 51 - 31 may 76.JPG|[[Kentville Railyard]], May 31, 1976.
 +
File:Tupper34.jpg|An SW1200 brings a covered hopper from the [[:Category:Subdivision Kingsport|CVR Spur]] into the [[Kentville Railyard]], 1990.
 
File:Tupper8.jpg|[[Kentville Railyard]] composite photo with the [[Kentville Coaling Tower]], [[Kentville Car Shop]] and the [[Kentville Repair Shop]], October 1990.
 
File:Tupper8.jpg|[[Kentville Railyard]] composite photo with the [[Kentville Coaling Tower]], [[Kentville Car Shop]] and the [[Kentville Repair Shop]], October 1990.
 
File:Tupper40.jpg|Composite panorama of the [[Kentville Railyard]] with the [[Kentville Track Scale]] in the centre & the foundation of the [[Kentville Machine Shop]] in the foreground, 1990.
 
File:Tupper40.jpg|Composite panorama of the [[Kentville Railyard]] with the [[Kentville Track Scale]] in the centre & the foundation of the [[Kentville Machine Shop]] in the foreground, 1990.

Revision as of 17:39, 16 October 2017

Kentville Railyard

The shunting yards in Kentville were located south of the the roundhouse and machine shop. The yard tracks fanned out from switches located at the level crossing of West Main Street. The yard tracks consisted of: four shunting sidings to the north of DAR the mainline, North 1, North 2, North 3 and North 4; and four shunting tracks located to the south of the mainline, South 1, South 2, South 3 and South 4. The shunting yard also contained the Kentville Track Scale. A siding and lead track connected the various yard tracks.

North of the shunting yard, a ladder track provided access to tracks serving the various DAR terminal shops, such as the turntable and roundhouse, machine shop, car shop, repair shop, the Kentville Water Tower and Kentville Coaling Tower. The ladder track led to the Cornwallis River Bridge and continued as the Kingsport Subdivision. Spurs serving various industries led off the yard track at various points, most significantly, the "Back Road Spur" which served multiple industries along River Street.

DAR railyard in Kentville, 1950s.
DAR railyard in Kentville, 1950s.
DAR railyard in Kentville, 1970s.
D.A.R. railyard in Kentville on June 21, 1987.
Kentville including D.A.R. railyard.
D.A.R. railyard in Kentville, 1974. This drawing is difficult to read but is proportionately correct and was scanned at 200 DPI. The images below although not proportionally correct because they appeared photographed, not scanned, are the same map in sections and very readable with additional notes to explain some of the original notations on the map. The two buildings immediatley east of the roundhouse are the machine shop and blacksmith shop.

Railyard in sections

The above drawing is difficult to read but is proportionately correct and was scanned at 200 DPI. These images although not proportionally correct because they appeared photographed, not scanned, are the same map as above in sections and very readable with additional notes to explain some of the original notations on the map.

These images are just begging to be put on CAD. If anyone can help this way or advise what the proper way to set up a CAD file for land mapping is so others can do the tracing, please let us know. See this message thread on our forum: http://dardpi.ca/Forum/viewtopic.php?f=3&t=18#p49


External Links